By Krzysztof Mucha, George Parada

• contains loose decals and covering foil

Highly distinct book protecting the realm warfare II Jagdpanzer IV L/48 – a tank destroyer in response to the Panzer IV chassis. The almost-vertical entrance hull plate used to be changed by way of sloped armor plates and internally, the format was once replaced to house the recent superstructure, relocating the gasoline tanks and ammunition racks. because the Jagdpanzer lacked a turret, the engine which initially powered the Panzer IV's turret may be eliminated.

The new superstructure had eighty mm thick sloped armor, which provides a miles better armor safety than a vertical armor of a hundred mm. To make the producing strategy so simple as attainable, the superstructure used to be made from huge, interlocking plates that have been welded together.

Containing dozens of archive black and white and colour pictures, together with 15 pages of close-up and stroll round photographs, and four pages of colour paintings profiles, this can be an amazing reference for either the fanatic and modeler, with loose decals included.

About the Series
Photosniper is a vintage sequence of hugely illustrated photograph books at the most sensible machines of battle, developing, with a variety of pictures, a close-up, walk-around view for every plane or automobile. With emphasis at the key positive aspects of every computer, together with their diversifications, paintings, markings, insignia and ameliorations, customizing and making a version couldn't be more straightforward. encompasses a loose sticky label sheet.

Show description

Read or Download Jagdpanzer IV L/48 PDF

Similar toys & models books

Armor Camouflage & Markings of the 2Nd New Zealand Division: Italy

Книга камуфляж и маркировка бронетехники 2-й Новозеландской дивизии камуфляж и маркировка бронетехники 2-й Новозеландской дивизии Книги Вооружение Автор: Джефри Плоуман Формат: pdf Издат. :Модель центрум Прогрес Страниц: fifty six Размер: 40,45 Язык: Английский0 (голосов: zero) Оценка:В книгерассмотрен камуфляж и маркировка бронетехники 2-й Новозеландской дивизии в период 2-й Мировой войны .

101 Bears to Make

This source for making teddy bears finds the right way to craft open-mouthed bears, sculpt tooth, create fur, make double-jointed necks and use trapunto and silk ribbon embroidered paw pads. There are styles for a standard teddy endure, a contemporary one and one for a pragmatic bruin.

Lionel FasTrack Model Railroads: The Easy Way to Build a Realistic Lionel Layout

As version railroaders begun tough ever-greater realism, Lionel spoke back in 2004 with its FasTrack approach that includes an built-in roadbed, scale-sized ties, and a less-obvious middle rail. Veteran pastime writer Bob Schleicher follows up his The Lionel FasTrack e-book with a more in-depth, extra precise examine Lionel’s progressive O-gauge procedure.

Knits for Bears to Wear: More than 20 Fun, Knit-to-Fit Fashions for All Teddies and Toys Including 18-Inch Dolls

I purchased this booklet a number of months in the past and feature knitted a number of clothes and dressed up a few bears to offer as presents, that have thrilled the recipients. i don't think about myself an exceptional knitter yet this booklet is comparatively effortless to persist with (and there's continually YouTube to provide you a assisting hand - which used to be beneficial for provisional cast-on).

Additional info for Jagdpanzer IV L/48

Sample text

I added the Jaguar commander’s cupola to the kit turret mainly because of the nicely cast texture and the inclusion of the inner periscopes. This was fairly easy to do, although the top part of the kit had to be widened slightly so that the cupola could sit properly. The interior of the turret was painted and weathered. The commander’s hatch was a mix of styrene strip, and aftermarket nut and bolt detail. Part of the periscope comes from the Tamiya IS-3 kit. Aber photo-etch tie downs were used for the handles for the driver’s hatch.

Historex punch sets (Bolt and Hex) • ‘The Chopper’ cutting board, made by North West Shortline • Dremel ‘Mighty Mite’ rechargeable drill • Numerous Dremel and dental drill bits • Mr Surfacer 500 and 1000 • Winsor and Newton artist oil paints • 2 pairs of pliers • 2 metal rulers • Sanding items (sticks, paper and files) • Nail clippers • Xacto knives • Tamiya regular and extra thin cement • Testors liquid cement Building the ISU-152 in 1/35 Subject: ISU-152 Model by: Nicola Cortese Skill level: Intermediate Kit: DML JSU-152 kit no.

The front hull surface has been filled, scraped and sanded, ready for some scratch-built extras. 10 rod. To clean the nylon brush after use, dip it in a jar of Testors thinners, which will remove the excess liquid, and dry it off with a paper towel. I’ve been using the same brush for a couple of years now and with proper care it will no doubt be usable for many years to come. Afterwards I started building up the front area, adding the massive tow hooks and spring-loaded retainers from the spares box (I managed to scrape off the kit’s poor representations).

Download PDF sample

Rated 4.15 of 5 – based on 36 votes